Information Needed for Inquiry or Order.
TYPE OF MATERIAL: Alloy applicable specifications- SAE,
AMS, ASTM, etc., whenever possible.
SIZE AND SECTION: Flat wire-gauge and width by decimal; show
tolerances for both. Round wire-diameter by decimal; show allowable
tolerances.
EDGE: Round, square, broken corner, etc.
SPECIAL SHAPES: Send print, sketch, give diagonals of rectangles,
radii of corners, etc. Whenever possible, send sample of material
desired.
CONDITION OF TEMPER: Define mechanical properties, ie. tensile
strength, Rockwell hardness, type of annealing, etc. Max. and min.
limits should be furnished when possible.
FINISH: Bare or plated (Tin-and degree of brightness,etc.)
END USE: Get the best possible product for application by
describing end product, such as, spring or fastener.
PACKAGING: Give approximate size and weight of coil, spool
or reel. Give length of wire to be straightened and cut with allowable
tolerance. Orders are made to customers specifications. Click here for more information.
|
